Technical Articles

1. SELECTING A ROLL-PRESS BRIQUETTER TO IMPROVE MATERIAL HANDLING by Richard K. Komarek. (Powder and Bulk Engineering Magazine, February, 1994)
   
   
2. COMPUTER AIDED DESIGN OF ROLL TYPE BRIQUETTERS AND COMPACTORS by Roman T. Dec, Ph.D., and Richard K. Komarek. (IBA Proceedings, Vol. 21, November, 1989, 21st. Biennial Conference, New Orleans, LA)
   
   
3. BINDERLESS BRIQUETTING OF PEAT, LIGNITE, SUB-BITUMINOUS AND BITUMINOUS COALS IN ROLL PRESS by Richard K. Komarek. (IBA Proceedings, Vol. 22, November, 1991, 22nd Biennial Conference, San Antonio, TX)
   
   
4. EXPERIMENTAL STUDY OF NEW TYPE ROLL PRESSES FOR GRANULAR SOLIDS by Roman T. Dec, Ph.D., and Richard K. Komarek. (ACHEMA91, International Meeting on Chemical Engineering and Biotechnology, Frankfurt AM Main 5-11)
   
   
5. STUDY OF COMPACTION PROCESS IN ROLL PRESS by Roman T. Dec, Ph.D. (IBA Proceedings, Vol. 22, November 1991, 22nd Biennial Conference, San Antonio, TX)
   
   
6. RESEARCH FOR WIDER APPLICATION OF ROLL PRESSES by Karl R. Komarek, and Roman T. Dec, Ph. D., (IBA Proceedings, Volume 21, November 1989, 21st. Biennial Conference, New Orleans, LA)
   
   
7. ROLL-PRESS BRIQUETTING CAN HELP LIME PRODUCERS IMPROVE MATERIALS HANDLING by Richard K. Komarek. (Mining Engineering Magazine, December, 1993)
   
   
8. TESTING PERFORMANCE OF ROLL PRESS FORCE FEED SYSTEMS by Roman T. Dec, Ph. D., and Richard K. Komarek (IBA Proceedings, Volume 23, October 1993, 23nd. Biennial Conference, Seattle, WA)
   
   
9. EXPERIMENTAL SIMULATOR OF ROLL PRESS FEED SYSTEM by Roman T. Dec, Ph. D. and Richard K. Komarek. (ACHEMA94, International Meeting on Chemical Engineering and Biotechnology, Frankfurt am Main 5-11, June 1994)
   
   
10. ROLL PRESS DESIGN FOR POWDER AND BULK SOLIDS by Roman T. Dec, Ph. D. and Richard K. Komarek (Powder and Bulk Solids Conference/Exhibition, Proceedings of the Technical Program, June, 1990, O'Hare Exposition Center, Rosemont, IL)
    
    
11. SELECTING BINDERS AND LUBRICANTS FOR AGGLOMERATION PROCESSES by Karl R. Komarek. (Chemical Engineering Magazine, December, 1967)
    
    
12. EXPERIMENTAL INVESTIGATIONS OF ROLL PRESS COMPACTION by Roman T. Dec, Ph. D. (Powder Handling and Processing, Vol. 4, No. 1, March, 1992)
    
    
13. PROBLEMS WITH PROCESSING OF FINE POWDERS IN ROLL PRESS by Roman T. Dec, Ph. D. (IBA Proceedings, Vol. 24, October, 1995, 24th Biennial Conference, Philadelphia, PA)
    
    
14. ROLL PRESS AGGLOMERATION OF INDUSTRIAL WASTES FOR TREATMENT AND RECYCLE by Roman T. Dec, Ph. D. (Second International Symposium on Extraction and Processing for the Treatment and Minimization of Wastes, Proceedings in print October, 1996, Phoenix, AZ)
    
    
15. ROLL-PRESS BRIQUETTERS FOR RECYCLING WASTE SLUDGE, case study. (Powder Handling and Processing, The International Journal of Storing, Handling and Processing Powder, Volume 9, Number 1, January/March 1997 issue)
    
    
16. BENEFITS OF USING SMALL LABORATORY ROLL PRESS FOR RESEARCH AND DEVELOPMENT OF COMPACTION PROCESS, by Roman T. Dec, Ph. D. and Richard K. Komarek. (ACHEMA97, International Meeting on Chemical Engineering and Biotechnology, 25th Exhibition Congress Frank furt am Main 9- 14 June 1997)
    
    
17. MAKING DENSE BRIQUETTES FROM FINE DUST, case study at General Electric's Lighting Division (Powder and Bulk Engineering, September 1998)
    
    
18. THEORETICAL AND EXPERIMENTAL STUDY OF COMPACTION PROCESS IN ROLL PRESS, by Roman T. Dec. (SME2000 Annual Meeting and Exhibit, Salt Lake City, UT, 28 February-1 March 2000)
    
    
19. OPTIMIZING AND CONTROLLING ROLL PRESS OPERATING PARAMETERS, by Roman T. Dec, Ph. D. (ACHEMA 2000, 26 Exhibition - Congress International Meeting on Chemical Engineering, Environmental Protection and Biotechnology. Frankfurt am Main Germany 22nd-27th May 2000)
    
    
20. ROLL-PRESS BRIQUETTING HELPS IOWA LIME PRODUCER RETAIN PREVIOUSLY WASTED FINES AS VALUABLE PRODUCT, by Jeff Dahl, Dennis Jones, and Richard Komarek. (Powder Handling & Processing, April/June 2001)
    
    
21. COMPARISON OF VARIOUS MODELING METHODS FOR ANALYSIS OF POWDER COMPACTION IN ROLLER PRESS, by Dr. Roman T. Dec (K. R. Komarek Briquetting Research, Inc.), Prof. Antonios Zavaliangos, and John C. Cunningham (Department of Materials Engineering, Drexel University)

To request a copy of any article please contact K.R. Komarek Inc. (ELK GROVE ONLY) at (847)956.0060 or by email at webadmin@komarek.com.